Customizable Lens Filter Case
by walter, published
Use This Project
Give a Shout Out
Customizable magnetic case for holding lens filters or other similarly shaped objects. The magnets work as a hinge, and to hold the case closed. If the cases are the same size, they will also stack nicely, with the magnets holding them together..
Check out the diagram in the photos section for a description of the customizer parameters.
Use cylindrical rare earth magnets for the hinges, around 3-5mm diameter and 2-4mm in height (depending on the thickness of the filter and how strong you want it. You can use http://www.thingiverse.com/thing:42800 to get the diameter right for a good press fit, or make them a bit oversized and glue them in. Make sure to orient them properly (so they attract) before pressing them in.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this Thing
Customizable Lens Filter Case by walter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving walter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure walter would love to see what you've printed. Please document your print and share a Make with the community.