iamburny's extruder gears with adjustable hole sizes
by dc42, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
iamburny's extruder gears are a great match for the spring-loaded Ormerod extruder from masonstonehenge, see http://www.thingiverse.com/thing:318458. However, after using slic3r to generate gcode and then printing them, I invariably found that the holes for the hex bolt head and the stepper motor shaft were too small. So I have made them parametric in this remix. The parameters at the top of the OpenScad file are just right for my 3D printer, but you may need to adjust them for yours.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
iamburny's extruder gears with adjustable hole sizes by dc42 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dc42 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dc42 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).