PS3 Eye Monitor Cam Holder
by FitzZZ, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This holder allows you to fix the camera atop your screen. The design is done to support most flat screens as the clamp width can be set with a thumbwheel.
Use 2x M3 nuts, a fitting washer and a M3 screw to fix the moving parts. Glue the top part to the rest. You'll figure it out ;-)
If your nut doesn't fit good (e.g., it has too much room) use the extra stl file provided or make your own stl from the provided source file.
Credits for used/altered parts:
1 The top cam holder: http://www.thingiverse.com/thing:4154
2 The thumbscrew: http://www.thingiverse.com/thing:13807
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PS3 Eye Monitor Cam Holder by FitzZZ is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FitzZZ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FitzZZ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).