Another PSU terminal cover
by RDickens, published
Use This Project
Give a Shout Out
This terminal cover has holes in it for a DPDT on / off switch, a PC cable fused socket and a gland for the cable exit.
When I first built my Reprap I was concerned about uncovered terminals on my 29A DC power supply. If I was going to have it running for 8+ hours at a time I wanted to have them covered.
The holes for the M3 nuts are a little tight but a bit of work with a knife will allow them to be fitted and still keep them nice and snug.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Another PSU terminal cover by RDickens is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving RDickens a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure RDickens would love to see what you've printed. Please document your print and share a Make with the community.