Laptop Wall Mount
by DanielStein, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I was browsing thingiverse and came across http://www.thingiverse.com/thing:446967 and decided to make something similar to suit my needs. I wanted to use screws rather than command strips and tweak the dimensions a bit. I designed this bracket to accommodate a variety of laptops so I'm sure it'll work for you.
Step 1. Load file into your favorite Slicer
Step 2. Slice with desired settings. (Infill >=20% recommended)
Step 3. Print two brackets
Step 4. Mount brackets on wall using wall anchors and #8 countersunk screws. (Try to get one bracket in a stud if possible)
Step 5. Put your laptop on the brackets
Step 6. Enjoy less clutter
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Laptop Wall Mount by DanielStein is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving DanielStein a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DanielStein would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).