NERF Dracogen barrel extension
by leebc, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is design #4 for a NERF barrel extension. It's based on a modded "Dracogen STV space gun" kit that Volpin Props made.
There is a "bayonet mount" ring mount that lets you conect it to some NERF blasters. The added length might inrease the accuracy of your shots.
I have made several other designs with various greebles.
DO NOT FORCE CONNECTION or you may break your NERF blaster.
Read instructions before printing.
I would love to get feedback from people.
1] Based on https://www.flickr.com/photos/volpinprops/14877022158/
Very tall model. So tall, in fact, I created a shorter version http://www.thingiverse.com/thing:984174
This is a very tall model. Make sure your printer is tall enough.
It's also gets a little unstable at the top. Make sure the top doesn't wobble.
It may be worth splitting this into a top and bottom half.
There is a tube that inserts into the NERF blaster barrel. To support this, there is a membrane placed across the bayonet mount. You'll need to cut this out.
The file nerf-barrel4-dracogen_stv-membrane.stl has the membrane, which is required for printing unless you use supports, nerf-barrel4-dracogen_stv.stl does not have the membrane.
I've printed the original model and the shorter 125 model in ABS without supports, but with a raft.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
NERF Dracogen barrel extension by leebc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving leebc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure leebc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).