Loading
Motorpixiegimbals

MotorPixie 2-axis gimbal for DJI Phantom 2 Vision (Final version)

by Motorpixiegimbals Sep 10, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Is there a way you can make the Arm_Final STL longer on the side with the 2mm screws? This would help with CG when using a GoPro. Thank you!

Hello
this on work on the phantom 1 ?
thank you

Kunne se du var fra Danmark af så tager den lige på dansk har du fået gimbal til at arbejde sammen med fjernbetjeningen så du kan tilte via den og se livewiev vi tlf.

Hello! Where can I watch videos with final version gimbal work?

Good work! Do you think it can be easily used for a Mobius with a mobius mount or may have balance problems?

Will these motors be ok as in the list of parts it say these motors as a hobbykings link so I ordered then looked and they are smaller in size but still fit.

Why have holes switched round on the version on the pitch arm.They are reverse to my turnigy motor

Thank you for your work! Great design and the installation manual is easy to understand.
one question though, in the wiring diagram you mentioned to never connect the jack while it is powered on. What do you mean by that?
Should I connect the jack to the camera while it is in off mode OR after it is powered on and ready to fly?

Connect the jack from the P2V to the gimbal, and the jack from the gimbal to the FC200 camera, when the system is powered off and the battery is removed.

Then insert battery and power on.

There is a risk of short circuiting the jacks when inserting and removing them. Therefore there must be no power on the system when doing so.

Comments deleted.