Sanguinololu Case with mounting lugs for 1.3a
by dcgtek, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I liked the original thing, but thought it would be better to use the base only and add a couple of mounting lugs to secure the case directly to the 2020 rail on the rear of the printer.
I also reduced the height of the side walls, as it will be left open.
Lets you adjust the stepper pots if you need and keeps the PCB open to allow for better airflow.
We did add a 60mm fan on a clip above the base. We tried adding the fan mount to the base, but had problems with the fan mount parts not being strong enough.
We'll revisit that at a later date.
Worked will with 2 loops, and 35% in-fill.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sanguinololu Case with mounting lugs for 1.3a by dcgtek is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dcgtek a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dcgtek would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).