Spool handle v3 - 67/60mm
by skriver, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A spool handle to be used on top of 3D printer frame. Originally designed for Monkeyfab Prime3D, but the handle should also fit similar 6 mm thick frames. The axis and the 2 round plugs are designed for 60 mm wide spool with 67 mm internal diameter. Maximum external spool diameter is 27 cm.
For more photos please visit my blog (Polish)
All parts except the handle can be printed using PLA with standard settings and no supports.
The handle itself needs some support material. I recommend printing it in natural position to get the top surface of the axis well finished.
The tube element can be skipped - it depends how tight plugs fits your spool. Actually, you can skip the plugs also - then just hang your spool directly on main part axis :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Spool handle v3 - 67/60mm by skriver is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving skriver a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure skriver would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).