Low friction spool holder for glass marbles, for screws
by Palmiga, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
PLEASE RESPECT THE LICENSE AND GIVE CREDIT TO THE DESIGNER
Low friction spool holder (made for Makerbot spools) that is great for flexible filament, with this design you do not risk stretching the filament and will not get low feed rate in the extruder. I developed this holder to be used with my own TPU filament.
Please also check out my unuiqe UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament.
Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Low friction spool holder for glass marbles, for screws by Palmiga is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Palmiga a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Palmiga would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).