PrintrBot LC small extruder gear
by WildWill, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a slightly improved version of the PrintrBot LC extruder small herringbone gear. I removed artifacts from a defunct set screw hole, and replaced some missing vertices in the teeth. Same gear, better mesh, less defects.
The hole for the shaft is purposely slightly undersized, as to allow for reaming/drilling for a precise fit to the motor shaft. You will need either a 5mm reamer, or drill, or a #9 reamer or drill, or you could also use a #8 reamer or drill. In order to make this gear turn smoothly, you should perform this on a drill press or lathe. Or, do it by hand carefully. ALWAYS WEAR SAFETY GLASSES WHEN DRILLING ANYTHING.
Edit, personalize, or revise this Thing
PrintrBot LC small extruder gear by WildWill is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving WildWill a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure WildWill would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).