Bead chain gear for stepper motors with 5mm shaft, e.g. for Polargraph plotter
by rincey12, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A remix of the bead gear found here http://www.thingiverse.com/thing:42188 - I only added a part ready to be put on a 5mm shaft of a standard stepper motor. The shaft can be fixed with a M3 screw from the side.
On my printer the 5mm hole was a bit too tight, a bit of work with a 5mm drill fixed this. The M3 makes its own thread when screwed in.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bead chain gear for stepper motors with 5mm shaft, e.g. for Polargraph plotter by rincey12 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rincey12 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rincey12 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).