Extension Cord Holder
by Claghorn, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Needed to hang an extension cord on the back of a cart, so I cobbled up this thing.
Took a while to print, and the last bit of the overhang that goes almost flat had a few problems, but it was still usable as printed. Did 15% fill, took about 2 or 3 hours to print. (Probably if I had a cooling fan on the hot end, the overhang would have printed better).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Extension Cord Holder by Claghorn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Claghorn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Claghorn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).