Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
FoldaRap Nozzle Cooling FAN
by Okatake, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
It is a fan nozzle for cooling the filaments that are emitted from the hot end.
â€»ï¼šThis is used to print together used to wear a mounter to fix the "x-carriage".
Parts required assembly
ãƒ»M3x8 boltã€€Ã— 2
ãƒ»M3 Washer Ã— 2
ãƒ»M3 Nut Ã— 2
ãƒ»INSULOK 100mm Ã— 4
ãƒ»40mm FAN Ã— 1
I've used Slic3r(0.9.8) when printing.
nozzle_diameter = 0.35
fill_density = 0.35
layer_height = 0.2
perimeters = 2
support_material_threshold = 2
support_material_pattern = rectilinear
support_material_spacing = 1.25
support_material_angle = 45
1.)Uncomment the following.
2.)Changing the motherboard Configuration.h
ã€€ã€€#define MOTHERBOARD 63
3.)Connected to the DC FAN_PIN of AZTEEG X1 board.ï¼ˆDIGITAL 4)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
FoldaRap Nozzle Cooling FAN by Okatake is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Okatake a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Okatake would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).