Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Calipers - 1/16in increments 6in long"
by RubeGoldberg, published
Use This Project
Give a Shout Out
These are some standard calipers with 1/16 and 1/4" markings. The markings are .4mm wide so someone let me know if they are printing well or not. I hope to upload these as a configurable model soon so you can select units.
This is a work in progress, feel free to send me suggestions for improvement! I think the next step for these would be to add a dial indicator for increased precision. I will start working on that as soon as I know they function well in their current state.
I fixed the tail end so that it now functions as a depth gauge.
Just print both sides of the calipers and they should assemble easily.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Calipers - 1/16in increments 6in long" by RubeGoldberg is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving RubeGoldberg a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure RubeGoldberg would love to see what you've printed. Please document your print and share a Make with the community.