Contents
Tags
Remixed From
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagThing Statistics
Summary
Design is currently untested! I decided to release it early.
This is a simplified version of thing #4824. I took out the stem of it so the stepper hangs off the other side of the extruder. This means you only need one extra 606 bearing. It also means a lot less wasted plastic.
Also, instead of a NEMA 17 mount, I changed the mounting pattern to be for the Kysan gearmotor so that you can use this upgrade on a MK3, MK4, MK5, or Brutstruder. I will be using this with a Brutstruder so that's the main thing I'm designing this for. There actually probably won't be enough clearance to use this with a MK4 so I'm going to recommend using this with a Brut or MK5.
Instructions
Print out a gearedsteppermount.stl, a small.stl from thing 4824, and a large.stl from thing 4824.
Attach stepper to plate with M3x8mm (?) bolts. Attach gears to stepper and M6 bolt according to directions on thing #4824. Attach plate to brut with M3x35mm bolts and nuts.
