FOLLOW my works on Facebook at:
[Read this carefully if you are interested to print one yourself !]
Please download the LATEST RELEASE [ 25HAN19-release.zip ] and you should find all STL files inside.
Do not download individual parts separately as some of them are outdated.
Print ALL files inside the .zip ONCE.
( This is my early work so there may be minor fitting issues )
This is a fully articulated model of MS-08TX/S Efreet Schneid as seen in the Mobile Suit Gundam Unicorn OVA series and RE:0096 TV series. At the moment where I start this project in 2013, the official HGUC and RE1/100 Efreet Schneid has not yet released, so the mechanics design may not be the same as the official one (considering that I had only one mechanic setting picture to count on).
The model design was intended to mimic a HGUC grade Gunpla model, which means most parts are not 3D-printing-friendly. That being said, I myself have tested on a FDM machine and confirms that this is FDM printable though a bit challenging. The original design was in 1/144 scale but you may scale up or down to suit your need. For FDM users, I would suggest you printing in larger scale (1/100 or 1/60) for better fitting and surface finishing. If you have access to SLA / industrial grade machines, you should have no problem in printing these parts.
P.S.: If you are printing in 1/144 scale and want to have stronger holding on the articulations, You may replace polycap parts (files with 'PC' in the filename) with the standard polycaps (runner PC-001) form Bandai. You could get one from most Bandai HGUC unicorn series kits, for example: HGUC Geara Zulu
This is the final update on the STLs (finally........after so many years).
Hope you enjoy my work:) THX.
Sorry, I didn't have time to make an assemble instruction...
Hopefully I could do it soon...
but if you're an experienced Gunpla builder, I believe you could figure it out easily :P