5mm to 6.5mm Coupler
by Trispectiv, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is just a coupler, joining a 5mm shaft, such as the Nem17 shaft, with a 6.5mm shaft, such as a lead screw from an older CNC project. It is not flexible, but it can withstand most Z speeds and moves executed during 3D printing. 25mm width / 35mm height.
- Insert 3mm nuts
- Connect shafts
- Lock with 3mm screws
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
5mm to 6.5mm Coupler by Trispectiv is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Trispectiv a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Trispectiv would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).