HDMIPI Folding Stand
by CheScott, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Quick and simple folding stand that bolts into the existing HDMIPI screen and folds flat (ish) against the back when not in use.
Remove the four corner back screws in the HDMIPI, place mounting on correct side (mounting with cut-out goes over the composite out of the Rasp Pi) and use 4 x M3 x 10mm to attach, Then 4 x M3 x 20mm to attach the stands (I used Nyloc's to create an adjustable tension in the "hinge")
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
HDMIPI Folding Stand by CheScott is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving CheScott a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CheScott would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).