This is the first part made for the Infill 3D delta machine please let me know if you find any issues. It is tailor made for an Infill 3D SunBurn hotend https://infill3d.com/home/25-sunburn-assembled.html however it should work with other hotends that use a 16mm groove mount, make sure to check measurements before you try a different hotend.
The Infill 3D Delta bot Is going to be based in a modified Kossel design, it will use magnetic joints the effector needs 6 countersunk magnets, there is holes behind the magnets for M4 set screws to augment the power of the magnet just adjust them close but not touching the ball-bearings it should add to the magnetic force considerably.
It uses dual 30mm fans, there is 2 options in how to run this effector as ABS or PLA, the bottom 2 screws of the fan hold either vents to be used with PLA or covers to close the vents to use it with ABS.
The effector has no probe since the end machine is going to auto level with Force-sensing resistors (FSRs).
This is the first release it has not been tested, I am missing the the magnets and ball bearings I should have them soon.
Latest version of the this part will live here https://infill3d.com/20-downloads
Parts you'll need ...
-2x 30mm Axial Fans
-2x M3 Hex Nuts
-8x M3x12 Socket Head Screws
-6x Countersunk Magnets 15mm X 5mm
-6X M4x5 Set Screws