Y axis belt tensioner for Prusa
by Rodot, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A very cheap, simple and effective belt tensioner for the belt of the Y axis of your prusa. Thanks to it, you no longer have to dismantle the whole bed to tight your belt.
A tight belt avoid wobble/backlash and improve parts quality !
Just put everything together, it's very simple !
Bill of materials :
- 1x printed part
- 1x cheap 608zz bearing
- 1x M8 bolt
- 3x D8 wahser
- 1x M3 bolt
- 1x D3 washer
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Y axis belt tensioner for Prusa by Rodot is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Rodot a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Rodot would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).