Decorated Water Bowls
by pmoews, published
Liked ByView All
Give a Shout Out
Here are four decorated water bowls sized for cats. They are easily scaleable to suit smaller and larger animals.
The openSCAD code is parametric - parameters are:
the bowl diameter in mm,
the bottom thickness.
the height of the rim,
and the rim thickness.
One can choose one of four decoration for the bottom; the decorations expand and contract to fit the size of the bowl.
The images comes from MaakMijnldee's cookie cutter collection - thing:35495. Dxf_files.zip holds the images and needs to be expanded and available when running the openSCAD code. Images of the decorations are shown at the upper left.
The bowls are all 100 mm in diameter with a 25 mm rim. The bottom is 3 mm thick and the rim 2.5 mm thick. Decorations are 1 mm indentations.
The four bowls are:
The bowls were printed directly on the build surface to minimize warping. On my Replicator they print in just under 3 hours using 10 percent infill and 2 shells.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Decorated Water Bowls by pmoews is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pmoews a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pmoews would love to see what you've printed. Please document your print and share a Make with the community.