For all those times you needed a 1/1 token and didn't have one. I did two options. The second has a smaller profile than the first. However, I wanted them above the surface enough so they could be seen from across the table easily.
I'm still working on which settings will work best for printing and will keep you posted. Of course you can try them on fastest, they will work just fine and only take about 7 min to print. If you want beauty, you'll have to increase infill, shells and reduce layer height.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/evl41rB2KBB
More from 3D Printing
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving litgoddess a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.