Now with added raspberry's
This is a simple arm mount for the AIBall Trek Wifi camera I made for my Prusa Mendel I2.
I designed this in Freecad as an exercise in learning how to use it.
Ive included the source files.
I now realise there are better ways of grouping the parts as a project and will re work this sometime to improve it.
But for now if anyone finds this useful please print it.
28 Nov 2014:
Added a case part to hold the Raspberry Pi camera to fit this arm.
Modified this to fit:
You need the back part from this.
Either print the plateofparts.stl or print parts individually.
Not all of the individual parts are orientated correctly for the bed so if you do not know how to flip them around I suggest using the plateofparts file.
Refer to the photo for construction.
Naming of parts should help.
Parts with lower go towards the frame.
Parts with upper go towards the camera.
Ive use M3 bolts and wing nuts.
2 x hex button screws from original AIBall trek camera stand.
7 x M3 wing nut.
2 x M3x25 hex bolts.
4 x M3x20 hex bolts.
1 x M3x15 hex bolts.
I bought the longest bolts and cut to size.
28 Nov 2014:
For the raspberry pi camera you need casetop.stl and the raspi-camera-case-bottom from http://www.thingiverse.com/thing:415388