'Small saladfingers' glass piece scanned with 123D Catch
by jasonwebb, published
Use This Project
Give a Shout Out
A neat little glass piece created by glassblowing student Kenny Galusha at the University of Nebraska at Kearney.
This piece was scanned using 123D Catch, then processed in Meshmixer and netfabb Studio Basic to make it manifold and 3D printable.
I have included the fully-textured cleaned OBJ mesh exported from 123D Catch, as well as the original 123D Catch project file (.3DP). Please remix!
This piece was scanned at the same time as another piece, the 'spiral wonton' ( http://www.thingiverse.com/thing:50574 ) so the 123D Catch project will include it.
Due to the unusual tapered shape of the object, I actually recommend printing it upside down (as oriented in the STL file) with full support. You may be able to print it right side up with full support, but that'd result in more wasted plastic.
I used 0.2mm layer height, 10% and 2 shells on a Makerbot Replicator using Grape Candy ABS filament.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
'Small saladfingers' glass piece scanned with 123D Catch by jasonwebb is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jasonwebb a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jasonwebb would love to see what you've printed. Please document your print and share a Make with the community.