3D printer roller spool holder
by imarin, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
FreeCAD parametric spool holder rollers for a 3D printer. The sizes in the files match a 10 cm long extended roller for the FABtotum, but you can edit the FreeCAD file to make it your wanted size.
With 10 cm you will not be able to fit the side panel of the FABtotum, but you will be able to use most big spools out of the box without needing to un-spool and re-spool to a smaller spool size.
Mines were done with 8 mm inner diameter, with matches the ones comming with the FABtotum, but was very difficult to put the bearings (the ones coming with the FABtotum) in place, as they were too tight. I have modified the file to 8.1 mm, so that you have less amount of trouble. You still might want to tweak the file to a larger value.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
3D printer roller spool holder by imarin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving imarin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure imarin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).