NEMA-34 mount to NEMA-23 motor adapter plate
by the_digital_dentist, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This thing lets you mount a NEMA-23 motor on a NEMA-34 motor mount.
Print it in 0.2mm layers with 50% fill, no brim, no support material necessary.
I made this so I could test a screw drive set-up on MegaMax. The screw drive had a NEMA-34 size servo motor and I didn't have a servo controller or power supply, so I tested using a NEMA-23 stepper by using this adapter to mount the NEMA-23 motor on the NEMA-34 size mount.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
NEMA-34 mount to NEMA-23 motor adapter plate by the_digital_dentist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving the_digital_dentist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure the_digital_dentist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).