Loading
sebastianliebhart

Folding Box for Arduino Uno

by sebastianliebhart Nov 3, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

magnets are 6mm x 3mm height ? thx

Is there any way that you could edit this for a full sized breadboard? And possibly add a latch instead of magnets use a latch? If not, add the program files to the downloads so that we could edit it to suit our needs?

Hello, thanks for your interest.

Yes it would probably be possible to adapt the design for a full sized breadboard and to add latches, but currently I don't have much free time because of school.

I might make some alternative versions of this project in the future, when I have time again.

If you would like to make some changes on your own, I've now added .step files so you should be able to open them in your CAD program.

Greetings, Sebastian

Thank you. I'm currently in the process of making the modifications. Ill upload it and notify you when done

So I'm a 3D printing/CAD noob, but the "top" stl's are all upside down, so my printer tries to print the flat side on top. Is there a way to flip these easily? I only have sketchup...

yea, i ran into this problem as well.. you can rotate the object in Makerbot on the Y axis 180 degrees then select "set flat" and it will fix it. Odd that the object is upside down and will not print the way it is.

What slicer are you using? I think in most slicers there is an option to rotate the object. If not, I can fix the model for you.
Greetings, Sebastian