Little Little Free Library
by Colleeniebikini, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A 3D printed and shareable little library for lovers of reading, books, sharing, and Little Free Libraries. Print one for yourself or to share in your nearest Little Free Library. You can also use it as a bookend, a library for a dollhouse, or to hold jewelry and small knick-knacks. Modeled to 1” scale based on plans found on http://littlefreelibrary.org/builders/. This little Little Free Library would make a great 3D printed gift for bookworms and lovers of the sharing economy.
This model is designed in separate parts for easy printing on home 3D printers and to give you the freedom to mix and match colors when you print your library. Once you have printed all of your pieces, the library is easy to assemble together with your adhesive of choice.
There are two files for the roof of the library. One that can be printed in one piece, and another file to print each roof panel separately. There are also two post design files available for printing. One with a flat bottom for placing on a table or inside your local Little Free Library, and one with a stake for placing in the ground.
Little Free Library is a registered trademark of Little Free Library Ltd. (http://littlefreelibrary.org) and is used with their permission.
The components of this library were 3D printed on a MakerBot Z18 and MakerBot Replicator 2. I had difficulty printing librarybox.stl on the Z18, but was able to print it on the Replicator 2 without any problems. Users with other printers may need to use support.
Once your pieces are printed, assemble them together and glue with your adhesive of choice.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Little Little Free Library by Colleeniebikini is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Colleeniebikini a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Colleeniebikini would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).