WaveOnWave Tablet Stand

by cfeniak Nov 8, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Stabilized Timelapse!


Pardon the strings, still dialing in Prusa Slicer 2.0. A light brushing with sandpaper cleaned it right up.

thanks for sharing

Exactly what i was looking for. Thanks.

Does this file need supports?

Depends on your printer and material chosen, but in PLA with part cooling fans you don't need any support.

Could you reduce the file size (complexity)? The 55MB file crashes my slicer.

Sure, low res version posted

Nice design.

Do you have the original files so I can make edits (I use sketchup fyi).


I used Auto Desk 123D to design this. It is free and very limited in what it can import/export. I've attached the design file, but you'll have to use 123D to make changes.

Width please . . . if the smallest wave is #1 and the back is #4 . . . what its the width between wave #2-3 and #3-4. I have an ipad Air in a Survivor case. The case adds a lot of bulk to the iPad and I want to know if it will fit in all the slots in this stand? Thank you for your help.


2-3 has about a 13mm gap
3-4 has about a 15mm gap

You'll have to be patient, I am out of town for two weeks and can't physically measure anything until then. You can also measure the stl with a program like NetFabb.