Rostock Pully Cover
by TechnoBill, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a minor addon for the original Rostock design. I found that anything I put down on my table always seemed to roll towards or be attracted to the moving belts and pulleys at the base of my Rostock while I was printing, so I added these simple covers that attach to the standard motor mounts.
They use the central bolt hole on the existing rod clamps to attach or you can simply use double sided tape etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rostock Pully Cover by TechnoBill is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TechnoBill a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TechnoBill would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).