XYZ Printing da Vinci Filament Resetter Housing
by dimensionbx, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the housing for our da Vinci resetter electronics.
Print it using the 'Good' da Vinci settings:
- Supports checked
- 3D Density = Low 10%
- Shells = Normal
- Layer Height = 0.3
- Speed = Standard
Clean the supports, drop the electronics in, snap it closed and it's ready.
Go to dimensionbx.com for the assembled electronics.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
XYZ Printing da Vinci Filament Resetter Housing by dimensionbx is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dimensionbx a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dimensionbx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).