Flat World RPG Coins
by thoromyr, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These coins have essentially the same design as those found here, but adapted for printing flat on the bed instead of on edge. Despite the adaptation, the bottom printing only survived on the larger coins on my Replicator 2, your mileage may vary.
Printed at 0.3mm, standard settings. If you print a full build plate make sure you have good adhesion, but I don't recommend printing directly on acrylic (too much damage on removal). Despite the fine detail on the tops of some coins they printed pretty well. I haven't loaded up filament to print anything but gold, but those are the most demanding of the designs and so I expect the others to do no worse.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Flat World RPG Coins by thoromyr is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving thoromyr a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure thoromyr would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).