Modified Extruder fix for Replicator 2 using 605 bearings
by pottiepie, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Modified swing arm for Replicator 2 extruder fix to fit 605 bearing. Source included for easy modification for other bearing sizes.
This is just the pivot arm. Print the fixed arm from http://www.thingiverse.com/thing:50345 and the pin from http://www.thingiverse.com/thing:32315 if you do not want to use a screw for the bearing.
Because of the Replicator 2 design, you'll have to get a 3M 10 mm screw or cut one of the original screw to attach the fixed arm.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Modified Extruder fix for Replicator 2 using 605 bearings by pottiepie is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pottiepie a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pottiepie would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).