Adapter for Ash-collector
by tedenda, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a new design to connect the hose to my ash-collector. The original was not so good and a have thought for a long time that I should do something about it, today was the day I fixed it!
Printed with MakerWare medium setting.
Layer height: 0.2
Extrude speed: 100mm/s
Travel speed: 150mm/s
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Adapter for Ash-collector by tedenda is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tedenda a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tedenda would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).