UV Light Meter Case
by audin, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a pistol-grip-style housing for a UV light meter for use in Wet Plate Collodion photography. It houses:
- Nokia 5110 LCD
- Trigger button
- Arduino Pro Mini
- 3 light sensors
- RF transmitter
- 9v battery
The two halves are held together with screws for the upper section and a screw-on cap for the lower section which houses the 9v battery.
Modeled in OpenScad. Apologies for the poor quality of the code.
Note on the screw cap: scale it up a bit when you print it (I printed three: 1.0, 1.05, 1.1. the 1.1 fits the best).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
UV Light Meter Case by audin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving audin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure audin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).