Electronic mount for K250 from Ultibots

by kdupke Dec 2, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

If I combine this with your PSU mounts will I be able to fit both inside the base triangle of the V-Slot 250?

See photo for thing 619430 (at the bottom you see the mount tray, with some cuts for the FSR), used with the RUMBA version (which is deeper). You might want to check thing 595820, with the fan mounted facing to the side (avoiding blowing at the hot bed).

I've seen that one but it looks like the fan is a bit too close to the connectors. I'll try printing it and see how it goes. I do like that the air can be pulled in from the outside.

The file is not manifold. Netfabb reports it as having 86 shells and 307 holes...

Hm, I can slice it pretty well. You may look at the code, if there is something to improve please let me know.

Do endstop wires or extruder wires need extending?

One set of end stop wires should be extended. The rest are fairly happy. -Ryan

Mine printed and installed well. Great part! Thanks for sharing.