3x AA to D battery adapter (no soldering required)
by pavelkaroukin, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
You will need two of these per one D battery.
I used household aluminium foil to provide contact - you will need to make it slightly different on each end. Just look at D battery to get idea how to form foil to provide reliable contact.
I used 50% fill and .25mm layer height. Might work well with lower fill percentage to save some filament.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
3x AA to D battery adapter (no soldering required) by pavelkaroukin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pavelkaroukin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pavelkaroukin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).