Vibration/Noise reducing shoes/feet for Replicator 2/2X
by Popcorn, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
While we were printing at normal speed we noticed that the desk on which our Replicator2 stands was shaking like 'crazy' when doing changes of directions.
Thats why we designed this kind of new 'shoes'(don't know how to call them) for the Replicator2 to reduce the vibrations.
After changing them with the standard 'shoes' the shaking is almost gone and as a nice side effect the Replicator2 is alot quiter like normal.
It's a simple upgrade and its worth it.
Just imagine your printer is making only half the noise like normal.
It should also improve your printing quality as well as reliability because your build plate wouldn't shake(vibrate) as much.
First step:Print 4 of them (for each leg one ) at medium settings with 10% infill.
Second step: Then stick on anti-slip pads / rubberpads or felt surface saver pad.
Third step: Use 8 M3 10mm screws to hold the shoes on the replicator while lifted up. (You may want to put something in between the screws and the replicator to not damage the coated surface)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Vibration/Noise reducing shoes/feet for Replicator 2/2X by Popcorn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Popcorn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Popcorn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).