PSU Mounting for Mendel Max
by dcgtek, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These are clips and feet to mount a power supply to the undercariage of a Mendel Max printer.
These can work in conjunction with the printer feet at http://www.thingiverse.com/thing:51895
Printed using 2 loops, 25% infill, 0.25 layers. Supports needed for back and side clips.
If you're using the feet http://www.thingiverse.com/thing:51895 then you just need to print
1 side clip (blue in the photo)
1 back clip (green in the photo)
1 PS foot (grey in the photo). You can print more to attach if you want, we just use 1.
Otherwise you probably want 2 back clips and possibly 2 side clips (please measure to make sure you can use 2 side clips).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PSU Mounting for Mendel Max by dcgtek is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dcgtek a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dcgtek would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).