Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Customizable Headset hook

by Lurwah, published

Customizable Headset hook by Lurwah Mar 6, 2013

Thing Info

4577Views 441Downloads Found in Office
Report Thing


This hook can be clamped onto your desk. After that you can hang your headset on/off it.


No more tangled wires, no more messing around with the microphone on your headset. With this hook you can easily get your headset out off the way when you're not using it.
The standard sizes work on my desk.
I will work on an explanation of all the Customizer settings soon.
2013-03-12: Moved Tightenator to bottom of design.
2014-07-14: Slight adjustment to allow for more headphone sizes, now use v2.

More from Office

view more

Thing Info

4577Views 441Downloads Found in Office
Report Thing


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

This design works great! It was easy to customize to the dimensions I needed.

Was able to print without supports, and made the prints a little wider than they had to be. I used gaff tape around the edges for a snug fit. Increasing the infill makes them a little stronger.

Thank you for the upload!

You're customizer file does not support any changes to the cradle width or depth. I am trying to extend it to 35mm wide and 15mm deep and it will not work

Lurwah - in reply to pfd1

Hi pfd1,
Thanks for pointing it out! :)
I now made a slight adjustment so the Customizer allows for more headphone sizes. Can you try again and let me know?