Print, w/o supports
Assemble using snipped 1.75mm filament pins; glue or fuse as needed. A drop of superglue was used to glue the gemstone covers onto the top of the LED. The Cross will press fit nice and snug into the holy hand grenade topper piece but feel free to glue/fuse if you want.
I used a simple wiring setup to house the battery and switch inside the hollow shape of the printed object. You hold it upright and it lights up; tilting it off-axis or laying it down on its side the LED light turns off. I've only pinned the bottom of my Holy Hand Grenade so I can replace the battery if needed.
Two options for printing available; one with the full assembly and the other files w/items in separate printable files.
More from Props
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving onebitpixel a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.