This Is a bracket I made for the Chinese RepRapDiscount Smart Controller LCD Interface that comes with some RAMPS kits.
After trying a few solutions from other people here on thingiverse I couldn't get something that would work. So I spent a couple minutes making my own.
This bracket should be tight enough to stay on the frame by itself however 2 mounting holes are provided should you wish to make it a little more permanent.
This bracket has a cut out for the memory card slot and is based on the MOAB minimalistic approach.
A simmilar bracket for the P3steel is coming soon.
20% infill worked perfectly for me with a .65mm shell on a .5mm nozzle.
RepRapDiscount Smart Controller as shown in the pictures (note the bad spelling at the bottom of the circuit board "SmatrConteallerD.PCB"
Aurora 3D printer or similar Prusa i3 with a 7.65mm thick Frame.
4x M3x10mm bolts and M3 nuts for mounting the LCD module to the bracket.
2x M3x16mm Bolts and M3 nuts for mounting the bracket to the frame of the printer (optional)