Gift Card Case
by ADVANCED3DCREATIONS, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just in time for X-Mas, this unique case is designed to host one standard sized gift card (3-3/8" x 2-1/18" x 1/32"). The print worked best if you print the body and cap standing up for best accuracy. The ribbon pieces print separate to allow you to choose a different color.
Print both the body and the cap standing vertically with the opening facing up. Print the ribbon pieces separate and with a different color. Apply a thin bead of super glue underneath the body ribbon and place on the body component. Assemble the cap to the body and glue the remaining ribbon piece aligning to the body ribbon piece.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Gift Card Case by ADVANCED3DCREATIONS is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ADVANCED3DCREATIONS a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ADVANCED3DCREATIONS would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).