This set is complete to let you build a outlet system for your JBL ProFlow pump.
It is composed of 4 main part types
Connectors between pump and system are named with prefix JBL_ every other part is for the system itself.
Also I added an adapter in different sizes to attach a hose to the system and a diffusor which allows you to attach a air hose (6mm/4mm).
If you need a different form of it which is missing leave a comment I try to creat it ;)
This allows you to print an outlet system for your need.
I printed it with a layer thinkness of 0.3mm the pieces are a very thight fit. Make sure you connect them from beginning like you want them because they will not get apart after joining them.
In case you have the need to disasseble make 2 axial cuts on the outer shell simaler to the connector. Then parting them will be possible. Check the picture of the straight part with holes there you can see what I mean.
In the two pictures you can see a series how they could be joined.