This Thing is currently under moderation: due to violation of terms of service
Files and images for this Thing are currently unavailable.
Waiting for the battle
by fantasygraph, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
moved to www.fantasygraph.com
as the last one, this statue can be print without support. There is support for the handle of the sword that you need to remove after print (tricky print, but easy removing).
the version 0.9.8 of slic3r do a very good job of slicing (see picture).
The example is a 0.2mm layer with 10% infill (2 perimeters - 7 hours print)
the statue size : 134.637mm high for a base diameter around of 120 mm
i hope you have fun
ps: you can see an artifact onf the right shoulder in the example print. It's because the print is from a previous test file and i corrected the problem in the uploaded file. i just don't want to do another 7 hours print ;) for this little thing.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Waiting for the battle by fantasygraph is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving fantasygraph a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure fantasygraph would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).