this case is designed to build a car battery from 36 Lithium LiFePO4 cells.
The 26650 cells (26 x 65mm) fit tight and secure into the top and bottom part. I left some extra space for the balancers.
Choose a top part - English or German text language.
- final update: OK, final version. Abandoned the splited Wall parts, all in one now.
If you printed one, let me know!
this is the biggest thing I printed yet. USE a heated chamber!
The green one you see in the pictures was printed ABS with a .8mm nozzle, .4mm layer height, 1 perimeter and 35% infill.
Battery terminals can be mounted through the holes on top, M8 bolts should fit tight.
M4 threaded rods an all four edges all through both parts to mount the top.
After a year of testing in my daily driver, I filled it up with resin. But you don't have to.
Just KNOW WHAT YOU DO when handling and using Lithium batteries! Use this thing on your own risk, I'm not responsible for any damage you cause!