A simple keychain designed around the Overwatch logo.
Which set should I print?
- ovw_key... Use this set if your keyring has a thin loop. This is the original upload.
- ovwKC... Use this set if your keyring has a thick loop. The keyring hole is 1.5x bigger than ovw_key.
Which file should I print?
- If you just want to print the keychain in a single piece: print ovw_key_assem or ovwKC_Single_LH depending on the keyring hole desired (see above).
- If you want multiple colors, print files with 1 & 2 with the desired colors and glue them together.
Post your makes! Leave credit where credit is due, and respect the non-commercial license!
2017/5/28 - Added ovwKC_Single_LH, ovwKC_1_LH, and ovwKC_2_LH. This set of files features a keyring hole 1.5x bigger than the original. It should be better if you are planning to directly put a large keyring on the keychain.
2016/5/14 - Re-sized and re-oriented for easier printing. 25% of original size. Removed ovw_key1.STL because it was outdated.
2015/7/25 - Added a single-piece version of the keychain for those who don't want to assemble.
2015/3/21 - Added ovw_key1_r2.STL. This revision adds a keyhole for a more secure keychain.