Arduino uno stand/holder
by Jigsawnz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is my version of the bumper. The original holds the board in what I think odd and unpractical places and the clips where causing problems when printing (stringing causing problems).But I liked the basic design. I redesigned it from scratch to the dimensions of my Arduino Uno rev 2 (I think). The board is being held in place exactly on the four corners so it can't go anywhere. The clips are made stronger and because of the way it is designed it is easier to clean up after printing and stringing doesn't affect the critical design of the clip.
Downside of this design, It fits only original Arduino's. These arduino's have slightly rounded corners. Older Arduino's and some knock-offs don't have the rounded corners and therefor the holder won't fit.
- Arduino Uno
- Arduino Leonardo
- *Arduino YUN
- Arduino Zero
- *Arduino M0 Pro
- *Adafruit Metro
- needs to be confirmed.
New version (V2.0) available for download. The bumper has been made a bit more beefy. Makes it easier to print and can withstand some more abuse.
What's even better then printing one bumper, printing four in one go! I have added an .stl that will let you print four bumpers in one session.
If you print this, please click the "I made one" on this thingiverse page.
object infill: 50%
layer height: 0.2mm
Number of shells: 2
Travel feedrate: 120
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Arduino uno stand/holder by Jigsawnz is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Jigsawnz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jigsawnz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).