GP 001- Geo Cache Container
by Gothampixel, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My First Geo Cache Container.
Two part, threaded screw cap and base.
Just over 70mm tall and 40mm wide. Thick walls to protect against the weather. There are 3 holes at the base sized to fit
Cylinder N48, Rare Earth Magnets 1/4 x 1 inch.
Enough room to fit a rolled up log, pen and some small trackers.
Prints well at 200 microns
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
GP 001- Geo Cache Container by Gothampixel is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Gothampixel a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Gothampixel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).